SKIP THE CONFUSION of What Bits You Need and START CREATING AMAZING PROJECTS on Your CNC This Week!
Andy’s CNC Router Bit Bundle was created to remove the confusion surrounding CNC router bits, all while not limiting your creativity. My set of bits comes with everything you need to approach your projects with the confidence that you’re using the right bit for the project. The number of projects and toolpaths you can create with just these three bits is endless!
What’s included in the set?
6 High-Quality, American Made Carbide CNC Router Bits
60 Degree V Groove Bit - 1/4” Shank, 1/2” Diameter, 5/8” Cutting Length
Used for Vcarving, texturing, sign making, chamfering edge profiles
Bowl and Tray Bit - 1/4” Shank, 3/4” Diameter, 1/4” Radius
Used to make bowls and trays, juice grooves on cutting boards, clearing material quickly
1/4”Downcut Bit - 1/4” Shank, 1/4” Diameter, 1” Cutting Length
The number one used bit in Andy’s shop, many uses but mainly for profile cuts needing a smooth top surface.
Flattening/Surfacing Bit - 1/4” Shank, 1” Diameter, 1/4” Cutting Length
Used to flatten your waste board, wood slabs, and other wooden surfaces where you desire a smooth, clean surface.
1/8” Downcut Bit - 1/4” Shank, 1/8" Cutting Diameter, 1/2" Cut Length
Used to make small projects that wouldn’t be possible with a ¼ downcut bit.
30 Degree V-Groove Bit - 30 degree Pencil Point, 1/4" Shank
Use to make very small, very intricate designs and carves
FREE Speeds and Feeds Chart for Common Materials